DPF CLEANER SPRAY - 400 ml
Diesel particle filter cleaner dissolves ash and soot deposits, impurities and residues in particle filters. Enables the regeneration of the loaded particle filter.
Details
Non-flammable, metal-free cleaner for dissolving carbon and ash deposits in diesel particulate filters. Neutral flushing elements simultaneously ensure smooth removal of soot particles.
- Excellent dissolves carbon deposits
- Non-flammable
- Cleaning is possible without dismantling the particulate filter
- Neutral, ash- and metal-free formulation
- Practical aerosol application - no tools required
- No subsequent cleaning necessary, as the cleaner evaporates without leaving residues
Dismantle temperature or pressure sensor on exhaust. Spray aerosol over the resulting opening with the special probe in the direction of the diesel particulate filter. Then carry out a test drive of at least 20 minutes. Alternatively, regeneration can be performed via a connected diagnostic device. Special note: If regeneration has not yet taken place during the test drive, it must be stimulated manually via the tester.
Features
Caution
If skin irritation occurs: Get medical advice/attention.
If eye irritation persists: Get medical advice/attention.
Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
Do not pierce or burn, even after use.
Do not breathe dust/fume/gas/mist/vapours/spray.
IF ON SKIN: Wash with plenty of water/...
Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Causes skin irritation
Causes serious eye irritation