364907_720xxx
SEILFETT TW contains a solvent. After evaporation of the solvent, a thin, firm film forms on the surface. Adjusted to low viscosity for easy processing. When applied correctly, the preserved surfaces are reliably protected against corrosion. SEILFETT TW can be applied at room temperature by spraying, dipping, or brushing on cleaned metal surfaces. An ideal application temperature is around 25 to 35°C. Film formation occurs after 2–8 hours with sufficient air circulation. Surface temperature must be at least 3°C above the dew point.

Store sealed at max. +30°C. If stored below +10°C, warm to 30°C and homogenize before use.
Item No. 720XXX

SEILFETT TW

Highly adhesive lubricant and anti-corrosive for wire ropes and use as automobile cavity protection and underbody coating.
 1 L
Variant 1 L
Item No. 720001
 5 L
Variant 5 L
Item No. 720005
 600 ml
Variant 600 ml
Item No. 720600
 1 L
Variant 1 L
Item No. 720001
 5 L
Variant 5 L
Item No. 720005
 600 ml
Variant 600 ml
Item No. 720600
Often bought together
Often bought together