EUROLUB RELEASE AGENT T25 is applied to clean and dry formwork using a brush or suitable spray device. The release agent is ready to use and must not be diluted with water, oil, or solvents. Tests must be conducted for all applications as local and material-specific conditions can influence performance.

Application temperature down to -10°C.

Consumption:

Smooth steel approx. 10ml/m²
Wood formwork approx. 20ml/m²

Артикул 535XXX

TRENNMITTEL T25

Molding and releasing fluid for the production of exposed concrete and paperhanger beton areas, concrete areas in in-situ constructions and ceiling elements.